HOW TO INSTALL OUR LOCKS ONTO YOUR
DRESSER OR CABINET DRAWERS
Two Ways to Make It Work!
There are many variations and styles of drawers and you may need to adjust the installation method according to your cabinet design.
The locks won’t always fit inside your drawer, but before you give up – please try the methods below:
LOCK FACING UPWARDS
Please check if:
- There is a solid, flat surface above the drawer for the latch placement;
- There is no drawer above;
- There is enough space for both lock and a latch!

Figure 1: Latch attached to the top panel above the drawer
Lock facing up
LOCK FACING TO THE SIDE
Please check if:
- There is enough space for both lock and a latch;
- Drawer side should have an open space!

Figure 2: Latch attached to the cabinet above the drawer
Lock facing to the side



IF NONE OF THESE WORK…
Unfortunately, it’s very likely our magnetic locks are not compatible with your drawer design.
In this case we recommend getting another type of locks to baby-proof your drawers:
https://www.amazon.com/dp/B07K1RVMSZ, https://www.amazon.com/dp/B07K1LYT3W

These are Adhesive Strips at our Amazon Storefront – alternative solution to our magnetic locks. Here is the link: https://www.amazon.com/Ecobaby
The only downside is they won’t be invisible since they are attached on the outside,
but this might be the only solution in some cases.
24/7 Customer Support
We care about every customer experience! Customer Satisfaction is an absolute priority for us! Our average response time is 1hour. If you need any help at all – we are here for you & your baby’s safety!
We Are Here To Help
- Locks Don’t Stick?
- Broken or Missing Parts?
- Keys Don’t Work?
- Need Personal Advice?